KEB COMBIVERT F5-A Applications Manual page 461

Analog input AN1 (ru.28)
Analog input AN2 (ru.30)
Analog input AN3 (ru.32)
Aux input (ru.53)
PID controller absolute reference (cn.01)
The setpoint of the PID controller is preset in percentage with cn.01 within the range of -400.0...400.0%. The
parameter is set-programmable.
PID reference source (cn.00)
Parameter cn.00 determines which input supplies the additional setpoint. The following options are available:
V a - Explanation
lue
0 off (default)
1 Analog input AN1 (ru.28)
2 Analog input AN2 (ru.30)
3 Analog input AN3 (ru.32)
4 Aux input (ru.53)
If one of the analog channels is adjusted, the signals can be adapted with the analog amplifiers individually to
the requirements (see chapter 6.2).
© KEB, 2012-10 COMBIVERT F5-A, -E, -H
cn.00 PID reference source
off 0
1
2
3
4
cn.00 PID reference source
Special functions
cn.01 PID absolute reference
-400,0...400,0 %
+
PID controller
+
Page 7.15 - 29
7