KEB COMBIVERT F5-A Applications Manual page 335

All other bits can remain at the factory settings for this example and are explained in the following chapters.
● Block 0 defines the start position
●
block 0
Position = 0
Permitted max. speed = 1500 rpm
next positioning step defined in block 1
no automatic starting of the drilling process, but waiting for "start position" command, i.e. "continuati-
on of the profile processing" = 0: no and „position setting" = 0: absolute
●
block 1
Position = material surface
Advance to material surface
next positioning step defined in block 2
automatic continuation of the drilling process, i.e., "continuation of the profile processing" = 1:yes and
"Position setting" = 0:absolute
●
block 2
Position = end of penetration
max. speed penetration
next positioning step defined in block 3
automatic continuation of the drilling process
●
block 3
Position = end of drilling
max. speed drilling
next positioning step defined in block 4
automatic continuation of the drilling process
●
block 4
Position = material surface
max. speed retraction
Retraction to starting position defined in block 0 → PS.26 = 0
automatic retraction to starting position → PS.27 = 1: yes + absolute
© KEB, 2012-10 COMBIVERT F5-A, -E, -H
Posi- and synchronous operating
→ PS.28 = 0
→ PS.23: Index / selection = 0
→ PS.24: Index / position = 0
→ PS.25 = 1500 rpm
→ PS.26 = 1
→ PS.27 = 0: no + absolute
→ PS.23: Index / selection = 1
→ PS.24: Index / position = 95000
→ PS.25 = 1500 rpm
→ PS.26 = 2
→ PS.27 = 1: yes + absolute
→ PS.23: Index / selection = 2
→ PS.24: Index / position = 100.000
→ PS.25 = 250 rpm
→ PS.26 = 3
→ PS.27 = 1: yes + absolute
→ PS.23: Index / selection = 3
→ PS.24: Index / position = 150.000
→ PS.25 = 500 rpm
→ PS.26 = 4
→ PS.27 = 1: yes + absolute
→ PS.23: Index / selection = 4
→ PS.24: Index / position = 95.000
→ PS.25 = 700 rpm
7
Page 7.12 - 43