KEB COMBIVERT F5-A Applications Manual page 476

Table of Contents

Advertisement

CP-Parameter definition
The configuration parameters are inserted in the Ud.group and indirect addressed like the configuration para-
meters of the CP parameters over a selector.
The following parameters result from it:
Ud.22:
PP parameter selection
Ud.23:
PP address
Ud.24:
PP feature
Ud.25:
PP multiplier/ write
Ud.26:
PP shifter/ write
Ud.27:
PP multiplier/ reading
Ud.28:
PP shifter/ reading
Ud.29:
PP offset
Ud.30:
PP upper limit
Ud.31:
PP lower limit
Example
Reading of the prog. parameters
The values of the source parameter in the selected sets are compared. If all values are equal then this value
is displayed, otherwise „data invalid" is displayed. If no source parameter is defined, „data invalid" is displayed.
Writing of the prog. parameters
The write value is written into all selected sets of the target parameter.
The following characteristics of the target parameter are checked:
Exceeding the limits: „invalid data"
Generally write protection: „write protected parameters"
Wwrite protection at switch on modulation: „operation not possible"
Write protection in the active set: „invalid set"
Password: 'Password invalid' is only displayed at parameters with supervisor-password
„Data invalid" is always displayed if no source parameter is defined.
Invalid target/source parameters
Some parameters cannot be adjusted as target/source parameter in ud.23. This means all parameters, which
are not permissible as CP-Parameters (characteristics 2 bits 15 = 1) or process date (characteristics 1 bit 28 =
1), as well as the prog. parameters. Explanation:
-
all sy parameters exception sy.02, 06, 07, 32, 41-44, 50-53
-
uf.12-14
-
all ud parameters exception ud.01, 09
-
fr.01
-
In.20,21,31-33
-
Ec.00,10,36-38
-
AA.00-13, 26-29, 34-41
-
PP.00-47
Page 7.16 - 10
COMBIVERT F5-A, -E, -H
Value range: 0...47
Value range: -1(off)..7FFFH, only available and permitted
addresses are acepted
Value range: 1...1023
Value range: +/- 32767
Value range: 0..48
Value range: +/- 32767
Value range: 0..48
Value range: +/- 2^31 -1
Value range: +/- 2^31 -1
Value range: +/- 2^31 -1
© KEB, 2012-10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Combivert f5-eCombivert f5-h

Table of Contents