KEB COMBIVERT F5-A Applications Manual page 416

Protective functions
The flow control with valve control and flow monitor is adjusted with this function.
Bit
-No.
0: off (default)
0
1: on
0: Operation (Default)
1
2: bereits + ST
The function is active and the mode for the status "drive active" is selected. If the function is not active
(Pn.91 bit 0 = 0) no error and warning is triggered.
There are two adjustments for the status „drive active":
operation
ready + ST
Name
no
O1
O2
R1
R2
OA
OB
OC
OD
Page 7.13 - 42 COMBIVERT F5-A, -E, -H
Pn.91: Flow control mode
Meaning
Flow control mode
Mode drive active
The drive is active if the modulation is released.
The drive is active, if all following conditions are met:
- the power unit is supplied (no NO_PU)
- there is no malfunction
- the control release is active (no NOP)
Pn.92: Valve control output selection
Function
no
Transistor output
Transistor output
Relay output
Relay output
Internal output
Internal output
Internal output
Internal output
Explanation
Flow control mode off/on
Decimal values
0 (default)
1
2
4
8
16
32
64
128
© KEB, 2012-10