KEB COMBIVERT F5-A Applications Manual page 221

Motor data and controller adjustments of the synchronous motor
The curve of rho is sinusoidal.
The HF signals can be used optimally with this motor. The HF signals cannot be used with this motor.
HF detection
With this function the rotor position is determined first with each switching on of the modulation. The amplitude
of the test signal is determined by the winding inductance dr.31.
COMBIVIS 5 Scope - H:\CvKebData\F5\SCL\HF Rotorlageidentifikation\1Kpltest.sc5 - Knoten 1
COMBIVIS 5 Version 5.6 Registriert für: :Horn
Druckdatum: 12.12.2006 07:46:05 Dateidatum: 28.11.2006 14:04:32
745: F5E-S/V2.21 8000rpm
X (us/Teilung): 5568
CH Parameter
A AA51 int. data 1
B AA52 int. data 2
C AA53 int. data 3
D AA54 int. data 4
B A
C
D
Cursor I:16822us
AA51 int. data 1 [-466] -466
AA52 int. data 2 [1] 1
AA53 int. data 3 [5088] 5088
AA54 int. data 4 [631] 631
If this function is activated, one can deactivate the general start with alignment current and brake handling.
The system position is also determined with this function. The determined position is stored in Ec.02 or Ec.12
depending on cS.01. Thus the system position of a motor at standstill can be determined. The operation of a
synchronous motor is still possible only with incremental encoder.
© KEB, 2012-10 COMBIVERT F5-A, -E, -H
The curve of rho is not sinusoidal and has constant
ranges.
Satz Y-Faktor (n/Teilung)
0 441
0 2
0 5000
0 1820
Cursor II:946us
[14] 14
[1] 1
[11512] 11512
[7199] 7199
Y-Null bei
0
0
0
0
Differenz:-15876us
[480] 480
[0] 0
[6424] 6424
[6568] 6568
Page 7.6 - 21
7