Setting Other System Mode Items - YOKOGAWA DAQSTATION DX100P Operation Manual

Setting Other System Mode Items

A/D
Application, Memory>Application
Application, Memory>Memory
Application, Memory>Memory and Trend, Memory timeup
IM 04L05A01-02E
11.
Press DISP/ENTER.
The settings are confirmed.
Set the login modes using the same method as steps10 and 11.
12.
Press ESC to return to the system mode menu.
1.
On the system mode menu, press the
entered to display the setting screen.
2.
Set each item.
3.
Press DISP/ENTER
4.
Press ESC to return to the system mode menu.
Below are screens used to set the scan interval, type of process, type of data to be
saved, channels for saving the data, and whether tags or channel numbers are used.
DX100P
Scan interval
The interval for sampling the
input signal.
Type of process
Batch: Better suited for batch
process.
Continuous: Better suited for
continuous process.
Type of data to be saved
Display: Saves the data that is
displayed on the screen.
Event: Saves the data acquired
according to the specified
sampling interval.
Sample rate
Sampling interval of event data.
Data length
The size of a single data file
containing event data.
Channels for saving the data
Set the channels for saving the
data.
Setting the DXP by the Administrator
soft key
to confirm the settings.
DX200P
corresponding to the item to be
Alarm, A/D
Application, Memory
25