Chapter 7: Cutting Unit; General Information; Cutting Unit Operator's Manual; Supporting The Cutting Unit When Servicing - Toro Greensmaster eFlex 1800 Service Manual

General Information

Cutting Unit Operator's Manual

Supporting the Cutting Unit when Servicing

Cutting Unit: General Information
The Cutting Unit Operator's Manual provides information regarding the operation,
general maintenance, and maintenance intervals for the cutting unit on your
Greensmaster machine. Additionally, if optional kits have been installed on the
cutting unit (e.g., grooming reel), the installation instructions for the kit includes
set-up and operation information. Refer to those publications for additional
information when servicing the cutting unit.
g207100
1. Locknut
Whenever the cutting unit has to be tipped to expose the bedknife or cutting unit,
support the rear of the cutting unit to ensure that the locknuts on the back of the
bedbar adjuster screws are not resting on the work surface.
Figure 150
2. Support
Page 7–2 Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E