Toro Greensmaster e1021 Installation Instructions
Hide thumbs
Also See for Greensmaster e1021:
- Service manual (216 pages) ,
- Diagnostic manual (84 pages) ,
- Operator's manual (44 pages)
Advertisement
Frame Kit
Greensmaster
Model No. 140-9341
Installation
Preparing the Machine
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the machine and remove the key.
1. Frame
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
e1021 or eFlex
Removing the Existing
Frame and Installing the
New Frame
To remove the existing frame and install the new
frame, refer to the instructions in the traction
unit Service Manual for removing and installing
components that connect to the frame, including the
drum drive, transmission, and cutting unit, among
other components. Refer to
(page 2)
to install the handle to the frame.
Figure 1
e1021 frame and the surrounding components.
Figure 1
Register at www.Toro.com.
Form No. 3448-708 Rev A
®
1021 Greensmower
Installation Instructions
for instructions to use loose parts in this kit
shows an overview of the Greensmaster
Original Instructions (EN)
Printed in the USA
All Rights Reserved
g368055
*3448-708*
Advertisement
Table of Contents
Related Manuals for Toro Greensmaster e1021
Summary of Contents for Toro Greensmaster e1021
- Page 1 Greensmaster e1021 frame and the surrounding components. g368055 Figure 1 1. Frame *3448-708* © 2021—The Toro® Company Original Instructions (EN) Register at www.Toro.com. 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420 All Rights Reserved...
- Page 2 Installing the Handle Use 2 bolts (1/2 x 2-1/2 inches), 1 anti-rotation washer, and 1 existing flat washer to secure the Apply thread-locking compound (e.g., blue handle assembly to the frame (Figure Loctite ® ) to the threads of the bolts (1/2 x 2-1/2 inches) and frame (Figure g370533...
Need help?
Do you have a question about the Greensmaster e1021 and is the answer not in the manual?
Questions and answers