Special Tools; Electric Motor Rotor Tool Set - Toro Greensmaster eFlex 1800 Service Manual

Special Tools

Electric Motor Rotor Tool Set

Removing the Rotor
Electrical System: Special Tools
You can order these special tools from your Authorized Toro Distributor. Some
tools are also available from a local supplier.
g202294
1. Base plate
Toro Part No. TOR6028
The rotor tool set for the electric motor is required to remove and install the
rotor from the motor housing. The tool set includes base plate, threaded shaft,
and handle (Figure 69).
Note: For the electric motor service procedures, refer to
Motor (page 5–71).
1. Remove the gearbox cover and output gear from the motor assembly; refer
to Servicing the Electric Motor (page
Figure 69
2. Threaded shaft
5–71).
Page 5–16
3. Handle
Servicing the Electric
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E