Toro Greensmaster eFlex 1800 Service Manual page 68

Installing the Drum Drive Idler Assembly (continued)
Traction and Reel Drive System: Service and Repairs
6. Slide the drum drive cover onto the drum drive assembly.
7. Install the 7 washer-head screws to secure the cover to the housing. Tighten
the screws as follows:
A. First, use an alternating crossing pattern, torque all the screws to 1.7 to
4.5 N∙m (15 to 40 in-lb).
B. Again use an alternating crossing pattern, torque all the screws to 9.6 to
10.7 N∙m (85 to 95 in-lb).
8. Rotate the traction engage/disengage lever to the engaged position to
tension the drum drive belt; refer to
Transmission (page
9. Install the rail kit wheels if they were attached; refer to
(Optional) (page 6–24).
10. Install the transport wheels if they were attached; refer to
(Optional) (page 6–21).
11. Connect the battery pack; refer to
(page 4–3).
Disengaging the Drum Drive from the
4–4).
Connecting the Lithium Battery Pack
Page 4–26
Rail Kit Wheels
Transport Wheels
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E