Service And Repairs; Reel Drive Belt - Toro Greensmaster eFlex 1800 Service Manual

Service and Repairs

Reel Drive Belt

Removing the Reel Drive Belt
Traction and Reel Drive System: Service and Repairs
The eFlex machines use a positive drive belt on the left side of the machine to
operate the cutting unit.
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
g203646
1. Reel drive cover
2. Remove the reel drive cover to expose the reel drive belt
g203647
1. Compression spring
2. Bearing housing
3. Loosen the bearing housing mounting nut
4. Use a 16 mm (5/8 inch) wrench, rotate the bearing housing to release tension
on the reel drive belt
5. Remove the reel drive belt from the pulleys.
Figure 23
2. Flange-head screw
Figure 24
3. Bearing housing nut
4. Reel drive belt
(Figure
(Figure 24).
Page 4–14
FF
4–3).
(Figure 23).
24).
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
position,