Transmission Belt Tensioner - Toro Greensmaster eFlex 1800 Service Manual

Transmission Belt Tensioner

Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
The transmission pulleys are driven by a multi-ribbed belt that is tensioned with
a spring loaded idler assembly. If the transmission belt tension needs to be
engaged or disengaged, do the following procedure:
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
g203656
1. Transmission
g205908
1. Alignment mark
2. Locate the transmission engage/disengage shaft on the inside of the
transmission next to the battery pack
Figure 12
eFlex 2120 Model 04046 (shown)
2. Engage/disengage shaft
Figure 13
2. Engage/disengage shaft
(Figure
Page 4–5 Traction and Reel Drive System: General Information
position,
FF
4–3).
3. Battery pack
3. Cover alignment mark
12).