Relay (For Models 04042, 04043, 04046 And 04049 Fitted With 04069) - Toro Greensmaster eFlex 1800 Service Manual

Relay (For Models 04042, 04043, 04046 and 04049 fitted with 04069)

g270848
1. Relay
2. Nut (2 each)
Testing the Relay
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
The relay used on the eFlex machine is 5 terminal 48 V relay and located below
the TEC controller inside the battery cover: refer to
1. Park the machine on a level surface and place the traction lever in the
N position. Turn the key switch to the O
EUTRAL
key from the key switch.
2. Disconnect the battery pack; refer to
(page 5–7).
3. Remove the 8 bolts that secures the battery cover to the mount bracket; refer
to Figure 90. Remove the battery cover from the mount bracket.
4. Note the position of the connectors and wire harness on the relay for the
assembly purposes. Disconnect the machine wire harness connectors from
the relay. Remove the relay from the machine for ease of testing.
Figure 117
3. Bolt (2 each)
4. Mount bracket
Connecting the Lithium Battery Pack
Page 5–67 Electrical System: Testing the Electrical Components
Figure 117.
position and remove the
FF