Charger Fault Codes - Toro Greensmaster eFlex 1800 Service Manual

Charger Fault Codes

Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
g202293
1. Charger fault display
During the battery pack charging operation, the charger may identify a problem
with either the charger or the battery pack. If a fault is determined, the fault
will be displayed in the charger LCD message display. The LCD message will
identify either a charger or pack fault, a fault identification code, and a fault
code description (Figure
Should there be charging operation issues due to a fault with the charger or
battery pack, a first step to remedy the issue would be to turn the battery charger
power switch to the O
FF
battery pack, disconnect the charger power cord from the outlet and wait for a
minute to allow complete charger and battery shutdown. Then, correctly connect
the battery pack charger and restart the charging operation to see if operation
has returned to normal. Some faults will be reset during the restart and will then
allow normal charger operation. If a fault continues to occur, ensure that you
record the fault information and contact your Toro Distributor for assistance.
Figure 68
Fault Message Screens
2. Battery fault display
68).
position, disconnect the charger output cord from the
Page 5–15 Electrical System: Lithium Battery Pack Charger
Operation (for Models 04042, 04043 and 04046)