Toro Greensmaster eFlex 1800 Service Manual page 100

Installing the Transmission
Traction and Reel Drive System: Service and Repairs
1. Ensure that all the internal transmission components are correctly installed
before transmission is installed to the machine frame.
2. Carefully install the transmission assembly toward right side of the machine
so that the extension housing is inserted into the right drum housing.
3. Align the transmission mounting holes with the frame and right drum housing.
Install and finger tighten the fasteners to secure the transmission to the
machine.
A. The 4 washer-head screws (item 8 in
housing to the right drum housing.
B. The bolt (item 13 in
that secure the rear of the transmission to the frame. Ensure that the
washer is below the frame tube.
C. The flange-head screw (item 2 in
transmission to the frame.
4. Once all the fasteners have been installed, fully tighten the fasteners in the
following order:
A. The 4 washer-head screws. First, torque all the screws to 1.7 to 4.5 N∙m
(15 to 40 in-lb). Then, use an alternating crossing pattern, torque the
screws to 9.6 to 10.7 N∙m (85 to 95 in-lb).
B. The bolt and flange-head screw that secure the rear of the transmission
to the frame.
C. The flange-head screw that secures the front of the transmission to the
frame.
5. Install the battery pack to the machine; refer to
Pack (page 5–77).
6. Install the electric motor to the transmission; refer to
5–69).
7. Install the drum drive belt and right drum drive cover to the machine; refer to
Drum Drive Belt (page
8. Slide the telescoping coupler onto the cutting unit hex shaft
9. Connect the reel clutch cable to the transmission; refer to
Clutch Cable (page
10. Connect the battery pack; refer to
(page 4–3).
Figure
Figure 56), hardened washer, and flange-head screw
Figure
4–21).
6–10).
Connecting the Lithium Battery Pack
Page 4–58
56) that secure the extension
56) that secures the front of the
Installing the Lithium Battery
Electric Motor (page
(Figure
Replacing the Reel
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
57).