Toro Greensmaster eFlex 1800 Service Manual page 157

Testing the EZ Turn Switch (continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
g202944
5. The EZ turn switch terminals are marked as shown in
circuitry of the switch is shown in the
the use of a multimeter (ohms setting), test the switch functions to determine
if continuity exists between the various terminals for each switch position.
Check the continuity between the switch terminals.
Circuit Logic Table
Switch Position
O
FF
O
N
6. Replace the EZ turn switch if necessary.
7. Connect the switch to the machine wire harness. Secure the console cover
to the handle.
8. Connect the battery pack; refer to
(page 5–7).
Figure 107
Circuit Logic Table (page
Normal Circuits
1+2
2+3
Connecting the Lithium Battery Pack
Page 5–57 Electrical System: Testing the Electrical Components
Figure 107. The
5–57). With
Other Circuits
4+5
5+6