Idler Assembly (Forward Rotating Groomer Drive) - Toro Greensmaster eFlex 1800 Service Manual

Idler Assembly (Forward Rotating Groomer Drive)

g228304
1. Pivot hub
2. Spacer
3. Spring
4. Idler bracket
5. Spacer
Removing the Idler Assembly (Forward Rotating Groomer Drive)
Belt Driven Groomer: Service and Repairs
6. Right drive plate
7. O-ring
8. Retaining ring
9. Grease fitting
10. Idler pulley
The groomer right drive plate assembly incorporates the idler system for
tensioning the groomer drive belt. The idler system uses a spring to maintain
proper belt tension.
1. Park machine on level surface. Turn key switch to the O
remove key from the switch. Ensure that the traction lever is in the N
position. Engage parking brake.
2. Disconnect the battery pack; refer to
(page 8–3).
3. If idler pulley (item 10 in
and slide pulley with bearings from idler bracket. Remove retaining ring
and bearings from idler pulley.
4. If idler bracket (item 4 in
drive plate:
A. Remove right drive plate assembly from right side of cutting unit; refer to
Grooming Reel (Forward Rotating Groomer Drive) (page
Figure 206
11.
12.
13.
Connecting the Lithium Battery Pack
Figure 206) needs to be serviced, remove locknut
Figure 206) or pivot hub are to be removed from
Page 8–24
Bearing (2 each)
Retaining ring
Locknut
position and
FF
8–10).
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
EUTRAL