Operator Advisories - Toro Greensmaster eFlex 1800 Service Manual

Main Information Screen (continued)

Operator Advisories

Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
The main menu and additional information screens can be accessed from the
InfoCenter main information screen by pressing and releasing the menu/back
button (as indicated by
to the main menu screen
For information on the main menu and menu item screens; refer to
Screen (page 5–25).
g202296
1. Advisory name
Operator advisories are automatically displayed by the InfoCenter when a
machine function requires additional action
be logged into the fault log.
The InfoCenter advisories include the following:
System Shutdown (#201): This advisory notifies the operator that the machine
is shutting down. Because the shutdown process takes some time, this advisory
is displayed so that an operator is aware of the shutdown and machine operation
is not available. The shutdown advisory will be displayed after the key switch is
turned O .
FF
Low Battery Shutdown (#202): If the battery state of charge is too low for
continued machine operation, the low battery shutdown advisory will notify the
operator that the machine will automatically shutdown. Battery charging is
necessary before returning the machine to normal operation.
Energy Saving Mode Active (#203): If the battery state of charge is too low for
normal machine operation, the energy saving mode active advisory will notify
the operator that the machine is operating with reduced functionality (cutting unit
disengaged and reduced traction speed). Battery charging is necessary before
returning the machine to normal operation.
Energy Saving Mode Warning (#204): If the battery state of charge is too low
for normal machine operation, the energy saving mode warning advisory will
notify the operator that the machine will start operating with reduced functionality
(cutting unit disengaged and reduced traction speed) in approximately 30
seconds. Battery charging is necessary before returning the machine to normal
operation.
at the bottom of the screen) on the display. Once
(Figure 75), navigation to the menu items can occur.
Figure 76
2. Advisory identification
(Figure
Page 5–23
Main Menu
76). An advisory will not
Electrical System: InfoCenter Display