Diagnostics Screen - Toro Greensmaster eFlex 1800 Service Manual

Diagnostics Screen

Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
g202794
1. Left/right button
2. Down button
3. Menu/back button
The diagnostics screen
electrical components. The diagnostics screen should be used to check the
operation of the machine switches and controls.
When using the diagnostics screen, ensure to have the machine on
kickstand to prevent unexpected machine movement as switches
and controls are moved.
Note: Some of the component states may have description available when using
the diagnostics screen. If an arrow icon is shown on the screen, pressing the
left/right button (as indicated by the
the description if available.
The diagnostics screen includes the following:
•
Key On identifies that the key switch is in the R
•
Key Start indicates that the key switch is in the S
Note: The key start position can be verified in the diagnostics screen by
rotating the switch to the S
•
PBrake Latch identifies that the parking brake latch is engaged or not.
•
EZ Turn indicates whether the EZ turn operation is O
Note: The EZ turn switch and EZ turn sensor are in series so both switch
and sensor have to be O
a turn) for the diagnostics screen to identify the EZ Turn operation as
being O . If either the switch is O
N
lowered to the ground), the EZ Turn operation will be O
•
Traction identifies that the traction lever is engaged or not engaged.
•
Reel Enable indicates whether the cutting unit is engaged or not engaged.
Figure 80
4. Diagnostics items
5. Diagnostics menu
(Figure 80) lists the various states of the machine
IMPORTANT
at the bottom of the screen) will display
position. The motor will re-initialize.
TART
(switch O with the cutting unit raised for
N N
or the sensor is O
FF
Page 5–29
position.
UN
position or not.
TART
or O .
N FF
(the cutting unit
FF
.
FF
Electrical System: InfoCenter Display