Transmission Reel Drive System - Toro Greensmaster eFlex 1800 Service Manual

Transmission Reel Drive System

g205733
1. Transmission housing
2. Reel brake ring
3. Reel clutch fork
4. Flange bushing (2 each)
5. Clutch pivot pin (2 each)
6. Ball bearing (2 each)
7. Ball bearing
8. Wave spring
9. Retaining ring
10. Flex coupler
Removing the Reel Clutch Shaft (bearing not seized)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
11. Hex shaft
12. Spring pin (2 each)
13. Flat washer
14. Flocked bearing shield
15. Bearing collar
16. Spacer
17. Reel clutch pulley
18. Clutch shaft
19. Reel drive hub
20. Reel clutch hub
The transmission removal from the machine is not necessary to service the
transmission reel drive system. The transmission reel drive components can
be accessed by removing the battery pack from the frame, removing the
transmission cover, and removing the drive belt.
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
2. Disconnect the reel clutch cable from the transmission; refer to
the Reel Clutch Cable (page
Figure 48
21.
22.
23.
24.
25.
26.
27.
28.
29.
6–10).
Page 4–43 Traction and Reel Drive System: Service and Repairs
Flange bushing (2 each)
Reel brake disc
Retaining ring
Ball bearing
Plug
Retaining ring (reel clutch cable)
Reel clutch lever
Retaining ring
Indicator mark
position,
FF
4–3).
Replacing