Reel Drive Assembly - Toro Greensmaster eFlex 1800 Service Manual

Reel Drive Assembly

g203644
1. Shoulder bolt
2. Bearing housing assembly
3. Woodruff key (3 each)
4. O-ring
5. Hardened washer
6. Hex nut
7. Spacer
8. Ball bearing (2 each)
9. Washer-head screw
10. Reel idler shaft
Traction and Reel Drive System: Service and Repairs
11. Set screw (2 each per pulley)
12. Reel pulley (25 tooth) (red)
13. Push nut
14. Reel drive cover
15. Flange-head screw
16. Cover plug
17. Belt
18. Reel pulley (22 tooth) (aluminum)
19. Reel pulley (24 tooth) (black)
20. Flange-head screw (2 each)
Note: The cutting unit clip adjustment on the eFlex 1800/2100, and 2120 is
adjusted by installing the cutting unit drive pulleys (items 12, 18, and 19 in
25) to the appropriate locations on the reel drive assembly; refer to
Cutting Unit Clip (page
Figure 25
21.
22.
23.
24.
25.
26.
27.
28.
4–10).
Page 4–16
Reel driveshaft
Reel drive housing
O-ring
Hex nut (2 each)
Cutting unit
Spring pin
Compression spring
Carriage screw
Adjusting the
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
Figure