Grooming Reel (Forward Rotating Groomer Drive) - Toro Greensmaster eFlex 1800 Service Manual

Grooming Reel (Forward Rotating Groomer Drive)

g228147
1. Locknut (4 each)
2. Drive cover
3. Groomer drive belt
4. Drive pulley
5. Shoulder bolt (2 each)
6. Spring
7. Right drive plate assembly
8. Groomer shim
9. Right groomer arm assembly
Removing the Grooming Reel (Forward Rotating Groomer Drive)
Belt Driven Groomer: Service and Repairs
10. Bolt (2 each)
11. Bushing (2 each)
12. Spring washer (2 each)
13. Locknut (2 each)
14. Left support plate assembly
15. Left groomer arm assembly
16. HOC washer (2 each)
17. Right cutting unit side plate
18. Left cutting unit side plate
Remove the grooming reel to replace individual blades, to replace worn groomer
components, to reverse the blades on the shaft (if not equipped with carbide
blades) or to replace the grooming shaft.
1. Park machine on level surface. Turn key switch to the O
remove key from the switch. Ensure that the traction lever is in the N
position.
2. Disconnect the battery pack; refer to
(page 8–3).
Figure 189
19.
20.
21.
22.
23.
24.
25.
Connecting the Lithium Battery Pack
Page 8–10
Driven pulley
HOC screw (2 each)
HOC nut (2 each)
Plow bolt (2 each)
Grooming reel assembly
Front roller assembly
O-ring
position and
FF
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
EUTRAL