Removing The Reel Clutch Shaft (Seized Bearing Condition) - Toro Greensmaster eFlex 1800 Service Manual

Removing the Reel Clutch Shaft (seized bearing condition)

Traction and Reel Drive System: Service and Repairs
g205735
1. Reel clutch shaft
If the reel clutch shaft assembly cannot be easily removed from the transmission
housing due to bearing seizure, follow the procedure to remove the reel clutch
shaft assembly.
1. Ensure that the transmission drive belt and reel clutch lever are removed
from the housing; refer to
g205736
1. Transmission housing
2. Carefully drill 2 No. 7 (0.201 inch diameter) holes in the transmission housing
using the dimples in the housing as centers for the holes
holes should be drilled completely through the housing allowing external
access to the ball bearing on the reel shaft.
3. Use a 3/16 inch punch through the drilled holes to carefully drive the bearing
and reel clutch shaft from the transmission housing.
Figure 51
2. Ball bearing
Transmission Drive Belt (page
Figure 52
2. Housing dimple
Page 4–48
3. Housing bearing bore
4–38).
(Figure 52). The
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E