Connecting The Lithium Battery Pack - Toro Greensmaster eFlex 1800 Service Manual

Connecting the Lithium Battery Pack

Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
The eFlex lithium battery pack contains high voltage which could
burn or electrocute you.
• Do not attempt to open the battery pack.
• Do not place anything in the connector of the battery pack other
than the wire harness connector that came with the product.
• Use extreme care when handling a battery pack with a cracked
case.
• Only use the charger designed for the battery pack.
Before servicing the machine, disconnect the machine from the
battery pack.
This will prevent unexpected machine operation.
g202195
1. Machine connector
To prevent unexpected machine operation during service, disconnect the
machine from the battery pack as the first step in any repair
the battery pack has been disconnected, the electrical system on the machine
can be safely worked on. During repairs, ensure that you do not allow tools or
machine components to complete the battery circuit that was opened with the
cable removal.
Connect the machine wire harness to the battery pack as the last step in any
repair.
WARNING
CAUTION
Figure 60
eFlex 2120 Model 04046 (shown)
2. Battery pack
Page 5–7
3. Battery connector
(Figure 60). Once
Electrical System: General Information