Toro Greensmaster eFlex 1800 Service Manual page 189

Lithium Battery Pack Charger (for Models 04042, 04043 and 04046)
(continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
The charger LCD message display may indicate a problem with either the
charger or the battery pack during charger operation. Should there be charging
operation issues due to a fault with the charger or battery pack, a first step to
remedy the issue would be to turn the battery charger power switch to O
disconnect the charger output cord from the battery pack, disconnect the charger
power cord from the outlet, and wait for a minute to allow complete charger and
battery shutdown. Then, correctly connect the battery pack charger and restart
the charging operation to see if operation has returned to normal. Some faults
will be reset during the restart and will then allow normal charger operation. If a
fault continues to occur, ensure to record the fault information from the charger
LCD display and contact your Toro Distributor for assistance.
With the exception of the battery charger fuse, power supply cord and labels,
there are no consumer serviceable parts on or in the lithium battery pack charger.
If a charger is inoperative and fuse and power supply cord are not damaged,
charger replacement may be necessary.
Page 5–89 Electrical System: Service and Repairs
,
FF