Service And Repairs; Electric Motor - Toro Greensmaster eFlex 1800 Service Manual

Service and Repairs

Electric Motor

g202784
1. Electric motor assembly
2. Transmission housing
3. Rear frame
Removing the Electric Motor
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
4. Left side plate
5. Frame
6. O-ring
Note: A damaged electric motor assembly may cause a #6, #7, #8, #9, or #10
fault to be generated and displayed on the InfoCenter display. Refer to the
Screen (page 5–26) for information on faults.
1. Park the machine on a level surface and place the traction lever in the
N position. Turn the key switch to the O
EUTRAL
key from the key switch.
2. Disconnect the battery pack; refer to
(page 5–7).
3. Disconnect the electric motor connections from the machine wire harness.
4. Support the electric motor to prevent it from falling.
Figure 118
Connecting the Lithium Battery Pack
Page 5–69
7. Flange-head screw (2 each)
position and remove the
FF
Electrical System: Service and Repairs
Faults