Servicing The Cutting Unit Assembly - Toro Greensmaster eFlex 1800 Service Manual

Servicing the Cutting Unit Assembly

g206897
1. Cutting unit
2. Flocked seal (2 each)
Disassembling the Cutting Unit
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
3. Bearing (2 each)
4. Bearing lock screw (right-hand
threads)
When removing the reel driveshaft (item 5 in
appropriate wrench or socket on 1 inch hex surface of shaft. Do
not use 1/2 inch extension on the end of the reel driveshaft when
loosening or tightening the driveshaft. The 1/2 inch hex is intended
for backlapping only.
Figure 179
IMPORTANT
Page 7–31
5. Reel driveshaft (left-hand threads)
Figure 179), use
Cutting Unit: Service and Repairs