Service And Repairs; Handle Assembly - Toro Greensmaster eFlex 1800 Service Manual

Service and Repairs

Handle Assembly

g198896
1. Reel clutch cable
2. Traction and reel drive lever
3. Throttle assembly
Removing the Handle Assembly
Chassis and Controls: Service and Repairs
4. Brake lever
5. Brake cable
6. Handle
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
2. Remove the console cover from the handle assembly
3. Disconnect the reel clutch and brake cables from the transmission; refer to
Replacing the Brake Cable (page 6–7)
(page 6–10).
4. For assembly purposes, label all the wire harness connections. Disconnect
the wire harness connections from the electrical components on the handle.
Position the wire harness away from the handle.
5. Note the height adjustment of the handle for assembly purposes.
6. Support the handle assembly to prevent it from moving.
Figure 133
and
Page 6–4
7. Console cover
8. Washer-head screw (4 each)
FF
6–3).
(Figure 133).
Replacing the Reel Clutch Cable
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
position,