Kickstand - Toro Greensmaster eFlex 1800 Service Manual

Kickstand

g198899
1. Flange nut
2. Spacer
3. Locking pin
4. Compression spring
Removing the Kickstand
Chassis and Controls: Service and Repairs
5. Spacer
6. Retaining ring
7. Bolt
8. Left side plate
Note: The offset handle clamps on eFlex 2100/2120 machines are mounted on
the outside of the side plates. On eFlex 1800/2120 machines, the offset handle
clamps are mounted on the inside of the side plates. The illustration in
144 shows the eFlex 2100/2120.
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
2. Pivot the kickstand up and hold against the frame stops.
Figure 144
10.
11.
12.
Page 6–18
9. Rear frame
Frame
Torsion spring
Kickstand
FF
6–3).
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
Figure
position,