Toro Greensmaster eFlex 1800 Service Manual page 198

Removing the Brake Cable (continued)
Installing the Brake Cable
Chassis and Controls: Service and Repairs
B. Remove the retaining ring that secures the cable eyelet to the brake
shaft on the drum drive housing.
C. Remove the brake cable eyelet from the brake lever shaft.
3. Remove the console cover from the handle assembly to get access to the
upper end of the brake cable.
4. Remove the flange nut (item 14
eyelet to the brake lever on the machine handle.
5. Loosen the lower brake cable jam nut and lift the cable free from the brake
cable bracket on the lower handle assembly. Remove the cable from the
bracket.
6. Remove the brake cable from the machine.
1. Secure the brake cable eyelet to the brake lever on the machine handle with
the flange nut (item 14 in
2. Attach the brake cable to the brake cable bracket on the handle assembly
with a washer and jam nut on each side of the bracket. Adjust the jam nuts
so that equal amount of cable threads are visible above and below the jam
nuts. Leave the jam nuts snug until final cable adjustment.
g198895
1. Retaining ring
2. Cable eyelet
3. Route the brake cable to the drum drive housing and secure the brake cable
to the brake lever shaft on the drum drive housing
A. Install the cable eyelet to the brake lever and secure with the retaining
ring.
B. Attach the brake cable to the casting slot on the drum drive housing with
a washer and jam nut on each side of the slot. Adjust the jam nuts so that
equal amount of cable threads are visible above and below the jam nuts.
4. Adjust the cable jam nuts at the brake cable bracket on the handle assembly
so that it requires 15.9 kg (35 lb) applied to the brake lever to release the
parking brake latch. After final cable adjustment, ensure that the brake does
not drag.
5. Install the console cover to the handle assembly.
Figure 135) that secures the brake cable
Figure 135).
Figure 136
3. Cable jam nut location
4. Brake cable
Page 6–8
(Figure 136) as follows:
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E