Toro Greensmaster eFlex 1800 Service Manual page 206

Assembling the Traction and Reel Drive Engagement Lever Assembly
Chassis and Controls: Service and Repairs
1. Assemble the traction lever assembly
g198906
1. Transport lever
2. Shift arm link
g198907
1. Transport lever
2. Shifter bracket
3. Screw and nut
2. If the shift arm link (item 23 in
lever, ensure that the tab on the shift arm link is positioned toward the solid
end of the latch pin
Note: One of the mounting holes in both the switch mount bracket and shift
mount is elongated to allow for adjustment of clearance between the transport
lever (item 28 in Figure
3. Secure the switch mount bracket and shift mount to the shifter bracket with
the 2 flange-head screws (item 13 in
you fully tighten the fasteners, position the legs of the shifter bracket to get
1.0 mm (0.040 inch) clearance between the transport lever and the reel shift
lever (Figure 143).
(Figure 140
Figure 142
3. Latch pin
4. Shift link tab
Figure 143
4. Reel shaft lever
5. Clearance location
Figure 140) was removed from the transport
(Figure 142).
140) and the reel shift lever (item 14 in
Figure
Page 6–16
and Figure 141).
Figure
141) and 2 flange nuts. Before
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
140).