Transmission Drive System - Toro Greensmaster eFlex 1800 Service Manual

Transmission Drive System

g205737
1. Flange-head screw (2 each)
2. Motor adapter
3. Transmission housing
4. Retaining ring
5. Ball bearing
6. Flocked bearing shield
Disassembling the Transmission Drive System
Traction and Reel Drive System: Service and Repairs
7. Flat washer
8. Set screw
9. Retaining ring
10. Wave spring
11. Wave washer
12. Driven pulley
The transmission removal from the machine is not necessary to service
the transmission drive system shown in
components can be accessed by removing the battery pack from the frame,
removing the electric motor from the transmission, removing the transmission
cover, and removing the drive belt.
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
2. Remove the electric motor from the machine; refer to
5–69).
3. Remove the transmission drive belt; refer to
4–38). Ensure that the wave washer (item 11 in
bearing bore of the transmission cover.
Figure 53
13.
14.
15.
16.
17.
18.
Figure
Page 4–50
Drive spline
Splined coupler
Ball bearing
Washer-head screw (4 each)
O-ring
Electric motor assembly
53. The transmission drive
FF
4–3).
Electric Motor (page
Transmission Drive Belt (page
Figure 53) remains in the
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
position,