Fuse Identification and Function (continued)
Testing the Fuse
Electrical System: Testing the Electrical Components
Fuse F1-2 (3 A): Protects logic power supply circuits.
Fuse F1-3 (3 A): Protects optional LED work light circuit.
Fuse F1-4: This fuse block position is open.
1. Access the fuse block as described above.
2. Carefully remove the fuse from the fuse block for testing.
3. The fuse should have continuity between the fuse terminals.
The eFlex machine uses special fuses that are rated for 80 V. If the
fuse replacement is necessary, ensure to use the fuses as identified
in your eFlex Parts Catalog. Do not use regular automotive fuses in
your eFlex machine.
4. Carefully install the functional fuse into the fuse holder.
5. After you complete the fuse service, secure the power center cover to the
machine with the 4 screws.
6. Connect the battery pack; refer to
(page
5–7).
IMPORTANT
Connecting the Lithium Battery Pack
Page 5–42
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E