Infocenter Display - Toro Greensmaster eFlex 1800 Service Manual

InfoCenter Display

Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
g202949
1. Handle
The InfoCenter display used on your Greensmaster eFlex is a LCD device that is
located on the handle console
to the operator during the operation of the machine, provides electrical system
diagnostic assistance for the technicians, and allows inputs for the adjustable
machine settings.
Power for the InfoCenter is available when energized by the TEC (the key switch
is in the S or R
TART UN
motor controller, lithium battery pack, and InfoCenter provide necessary machine
communication for the InfoCenter operation.
Note: Icons that are used on the InfoCenter display are identified in the Traction
Unit Operator's Manual.
Figure 71
2.

InfoCenter display

(Figure 71). The InfoCenter provides information
position). A CAN-bus system involving the TEC, electric
Page 5–19 Electrical System: InfoCenter Display