Drum Drive Belt
g203649
1.
Washer-head screw (7 each)
2.
Wave washer
3.
Retaining ring
4.
Extension spring
5.
Brake clevis pin
6.
Drum drive housing
Removing the Drum Drive Belt
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E
7.
Drive pulley (from transmission)
8.
Washer-head screw (4 each)
9.
Idler arm assembly
10.
Shoulder screw
11.
Idler pulley assembly
12.
Retaining ring
The drum drive system on the eFlex 1800/2100, and 2120 machines uses a
multi-ribbed poly-V drive belt on the right side of the traction drum.
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to
Connecting the Lithium Battery Pack (page
2. If installed, remove the transport wheels; refer to
(page
6–21).
3. If installed, remove the rail kit wheels; refer to
(page
6–24).
Figure 28
13.
14.
15.
16.
17.
18.
Page 4–21
Traction and Reel Drive System: Service and Repairs
Drum drive belt
Brake mount pin
Brake band
Gear assembly
Gasket
Drum drive cover
position,
FF
4–3).
Transport Wheels (Optional)
Rail Kit Wheels (Optional)