Rep 2.1.16: Printer Cover Open Switch - Xerox 450c Service Manual

REP 2.1.16: Printer Cover
Open Switch
Parts List: 2.1
1. Perform the following:
a. REP 1.1: WorkCentre Cover on page 4-3
b. REP 2.1.18: Printer Assembly on page 4-
24
2. Disconnect the wiring harness at connector
J3 on the printer interface PWB).
3. Remove mounting screw.
4. Remove the printer cover open switch
mounting screw and remove the switch.
Page 4-22
Mounting screw
Figure 4-29 Printer cover open switch
Printer cover open
wiring harness
www.printcopy.info
Printer cover
open switch
Xerox WorkCentre 450c/450cp Service Manual