Spare Parts; Safety And Handling - Waters ACQUITY Isocratic Solvent Manager Overview And Maintenance Manual

Spare parts

To ensure that your system operates as designed, use only Waters Quality
®
Parts . Visit www.waters.com/wqp for information about Waters Quality
Parts, including how to order them.

Safety and handling

Bear in mind the following safety considerations when performing
maintenance procedures:
Warning:
when handling solvents, changing tubing, or operating the instrument.
Know the physical and chemical properties of the solvents used (see the
Material Safety Data Sheets for the solvents in use).
Warning:
the sample manager. The panels cover components serviceable only by
Waters technicians.
Caution:
system module, do not disconnect an electrical assembly from the
module while the module remains connected to the ac supply source.
Follow this procedure to completely interrupt power to the module:
1. Set the module's power switch to Off.
2. Disconnect the module's electrical supply cord from the ac source.
Afterward, wait 10 seconds thereafter before you disconnect an
assembly.
To avoid personal contamination with biohazards,
Warning:
compounds that are toxic or corrosive, or the residues of such
compounds, wear clean, chemical-resistant, powder-free
gloves when reinstalling fittings.
To prevent injury, always observe Good Laboratory Practice
To avoid electric shock, do not remove protective panels from
To avoid damaging electrical components or circuitry of a
September 26, 2013, 715004208 Rev. A

Spare parts

79