Initializing The Position Correction Table - YASKAWA Sigma-7 Series Product Manual

Initializing the Position Correction Table

Use the following procedure to initialize the Position Correction Table.
1.
Click Initialize in the Function Group.
When the cursor is positioned on Initialize in the window, the "The SERVOPACK parame-
Information
ters are returned to the default settings" message will be displayed, but the parameters
will not be initialized.
The Position Correction Table will be initialized.
2.
Click the OK Button.
3.
Click the OK Button.
3.4 Position Correction Table Settings
3.4.3 Setting Method with the SigmaWin+
3
3-13