Ptx1000 Network Port Leds; Figure 8: Network Port Leds On A Ptx1000 - Juniper PTX1000 Hardware Manual

Table 6: PTX1000 Port Mapping (continued)
Port Number
63
64
65
66
67
68
69
70
71

PTX1000 Network Port LEDs

Copyright © 2018, Juniper Networks, Inc.
40-Gigabit
4 x 10-Gigabit Ethernet
Ethernet Channelized Port
Ports (Default) Groups
Each PTX1000 network port uses a single bicolored LED to indicate link status and activity.
The triangular LEDs are located between the top row and bottom row of ports. The LEDs
are shaped so that each LED points to the port with which it is associated.
Figure 8 on page 29 shows the location of the LEDs.

Figure 8: Network Port LEDs on a PTX1000

1— LED for shaded network port (top left)
NOTE: The same bicolored LED also indicates status when the port is
configured to operate as four 10-Gigabit Ethernet interfaces.
Table 7 on page 30 describes the network port LEDs.
Ports Disabled When a
100-Gigabit 100-Gigabit Ethernet
Ethernet Ports Interface Is Configured
– –
– –
63, 64
– –
66, 68
– –
– –
– –
69, 70
Chapter 1: Overview
29