Pinout Specifications; Rj-45 Connector Pinouts For An Mx Series Routing Engine Ethernet Port; Rj-45 Connector Pinouts For Mx Series Routing Engine Aux And Console; Ports - Juniper mx240 Hardware Manual

CHAPTER 11

Pinout Specifications

RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port on page 127

RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE

Ports on page 128
The port on the Routing Engine labeled
Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing
Engine to a management LAN (or other device that supports out-of-band management).
Table 64 on page 127 describes the RJ-45 connector pinout.

Table 64: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port

Pin Signal
1 TX+
2 TX–
3 RX+
4 Termination network
5 Termination network
6 RX–
7 Termination network
8 Termination network
MX240 Routing Engine Description on page 23
RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE Ports on
page 128
is an autosensing 10/100-Mbps
ETHERNET
127