Appendix Fmx480 Cable Connector Pinouts; Rj-45 Connector Pinouts For An Mx Series Routing Engine Ethernet Port; Rj-45 Connector Pinouts For Mx Series Routing Engine Aux And Console; Table 41: Rj-45 Connector Pinout For The Routing Engine Ethernet Port - Juniper MX480 Hardware Manual

APPENDIX F
MX480 Cable Connector Pinouts

RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port

Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port on page 291

RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE

Ports on page 292
The port on the Routing Engine labeled
Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing
Engine to a management LAN (or other device that supports out-of-band management).
Table 41 on page 291 describes the RJ-45 connector pinout.

Table 41: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port

Pin Signal
1 TX+
2 TX–
3 RX+
4 Termination network
5 Termination network
6 RX–
7 Termination network
8 Termination network
MX480 Routing Engine Description on page 23
RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE Ports on
page 292
is an autosensing 10/100-Mbps
ETHERNET
291