Mounting/Dismounting The Inscription Label Holder (Optional), Width 18 - Festo VTSA-44-MP Series Manual

2. Fitting
2.3 Mounting/dismounting the inscription label holder (optional),
width 18 ... 52 mm
Mounting
Dismounting
1
Fixture for
inscription label
holder on the
manifold
sub-base
2
Inscription label
holder
Fig. 2/4: Mounting the inscription label holder
2-14
An inscription label holder can be mounted onto each manifold
sub-base to label the valves or working lines.
Clip the inscription label holders into the recesses in the
manifold sub-bases (see fig.).
Pull the inscription label holder out of the mounting on the
manifold sub-base.
Festo P.BE-VTSA-44-EN en 1101f
1
2