Mo (Widths 18 - Festo VTSA-44-MP Series Manual

4. Commissioning
Actuation type
Non-detenting
Turning with detent
Tab. 4/2: Actuation types of the manual override
4.2.1 MO (widths 18 ... 52 mm)
Festo P.BE-VTSA-44-EN en 1101f
The manual override has been designed to be used as follows:
Mode of operation
Width 18 ... 52 mm
After actuation the manual override is reset automatically by a spring.
The manual override remains actuated until it is reset by hand.
Note
If you use the VTSA... valve terminal in a dusty environ-
ment, Festo recommends that you protect the manual
overrides with cover caps of type VAMC-S6-CS against dirt
and dust when the valve terminal has been commissioned.
At the same time the manual overrides are protected
against incorrect use.
The detenting/non-detenting function of the manual override
can be modified to only non-detenting actuation if a cap is
fitted.
4-7