Festo VTSA-44-MP Series Manual page 170

A. Technical appendix
General
Permitted temperature range
– Long-term storage
– Operation
– Medium
Protection class
(with cable from Festo accessories)
Relative humidity
Corrosion protection
Mounting position
Tightening torques
– Multi-pin plug socket on multi-pin Sub-D
– Angle bracket at pneumatic supply
plateor manifold sub-base
– Valve sub-base on manifold sub-base
– Cover on the valve
– Cover plate on manifold sub-base
– Exhaust plate or exhaust cover on
supply plate
– Manifold sub-base/end plate
– Adapter plate at pneumatic interface
– Vertical stacking
Materials
1)
Type 4 (hosedown test, test no. 5.7)
Tab. A/1: General technical data for the VTSA... valve terminal
A-4
Width
o
-20 ... +60 C
o
-5 ... +50 C
o
-5 ... +50 C
IP65 per DIN 60 529
1)
Type 4 as per NEMA
o
90 % at 40 C
KBK 0 (as per FN940070)
Any
1.5 Nm (± 20 %)
3.0 Nm (± 10 %)
18 mm 26 mm
1.0 Nm 2.0 Nm
(± 10 %) (± 10 %)
--- ---
1.0 Nm 2.0 Nm
(± 10 %) (± 10 %)
2.2 Nm 2.2 Nm
(± 10 %) (± 10 %)
3.0 Nm 3.0 Nm
(± 10 %) (± 10 %)
--- ---
1 Nm 2 Nm
(± 10 %) (± 10 %)
GD-AL, PA, NBR, FPM
42 mm 52 mm
3.0 Nm 6.5 Nm
(± 15 %) (± 20 %)
--- ---
3.0 Nm 6.5 Nm
(± 15 %) (± 20 %)
3.0 Nm 3.3 Nm
(± 10 %) (± 15 %)
3.0 Nm 3.0 Nm
(± 20 %) (± 10 %)
--- ---
3 Nm 5 Nm
(± 15 %) (± 20 %)
Festo P.BE-VTSA-44-EN en 1101f