Festo VTSA-44-MP Series Manual page 34

1. Summary of components
Components (width 18 ... 52 mm)
Monostable 5/2-way
valves
1)
For notes on installing the vertical stacking components, see Chapter 3
Tab. 1/8: Components of the pneumatic module of the VTSA... valve terminal
1-18
Alternative:
Valve with two monostable
2/2-way valves, 3/2-way valves
or one bistable 5/2-way valve
or one 5/3-way valve
Vertical stacking, optional components:
Pressure regulator plate type: VABF-S4...R... or VABF-S2...R...
(with or without pressure gauge)
Flow control plate type VABF-S4...F1B1... or VABF-S2...F1B1...,
Pressure shut-off plate type: VABF-S4...L1D1... or VABF-S2...L1D1...
Vertical pressure supply plate type: VABF-S4...P1A3... or
VABF-S2...P1A3...
Manifold sub-base
type VABV...T1 or
type VABV...T2
Alternative:
Cover plate, for sealing an
unused valve location
Type: VABB-S4...WT... or
VABB-S2...WT...
1)
Optional: 90° connection plate
type VABF...A1G2...
Working connections (2) and (4)
turned 90°.
Festo P.BE-VTSA-44-EN en 1101f