Festo VTSA-44-MP Series Manual page 42

1. Summary of components
1
Port (2) (B)
Port (4) (A)
1
B-pressure regulator
2
Valve
3
A-pressure regulator
4
Intermediate plate
Fig. 1/6: Reversible AB-pressure regulator
1-26
The following example shows the following switching position:
The air in duct (1) is passed in the pressure regulator plate to
pressure regulators A and B, regulated there and then passed
to ports (3) and (5) on the valve. In the valve, the air is routed
to port (2) of the manifold sub-base. The exhaust is con-
ducted via duct (4) in the pressure regulator plate and split
there to ducts (3) and (5) and exhausted.
2
8 7
5
6
7
8
For instructions on how to install this pressure regulator,
see Chapter 3.5.3
6
Manifold sub-base
Duct (5) (exhaust)
Duct (1) (air)
Duct (3) (exhaust)
Festo P.BE-VTSA-44-EN en 1101f
3
4
5