Festo VTSA-44-MP Series Manual page 70

2. Fitting
1
H-rail
2
Retaining screw
of the H-rail
clamping unit
3
Clamping
component of the
H-rail clamping
unit
Fig. 2/1: Mounting the VTSA... valve terminal on an H-rail
2-8
4. Mount the H-rail clamping units (see Tab. 2/2)
5. Hang the valve terminal onto the H-rail (see Fig. 2/1,
arrow (A)).
6. Swing the valve terminal onto the H-rail (see Fig. 2/1,
arrow (B)). Make sure that the clamping component lies
horizontally with respect to the H-rail.
(O)
3
7. Secure the VTSA... valve terminal, as with the CPX terminal,
against tilting or sliding by tightening the retaining screw
with 1.3 Nm.
(B)
Festo P.BE-VTSA-44-EN en 1101f
1
2