Dismantling The Valve Terminal - Festo VTSA-44-MP Series Manual

5. Maintenance and conversion
Connecting variants
CPX Terminal
FB 21 (type 03)
Multi-pin node, Sub-D
Multi-pin node, Cage Clamp
Multi-pin node, M23 round
plug
Multi-pin node IC
Tab. 5/2: Disconnecting the electrical connections
5-6
Disconnecting the electrical connections
Procedure
•
Instructions on disconnecting the electrical connections can be
found in the CPX system manual.
•
Instructions on disconnecting the electrical connections can be
found in the FB 21 (type 03) electronics manual.
•
Loosen the fastening screws and remove the Sub-D multi-pin plug.
•
Loosen the multi-pin cover
•
Mark the cores of the connecting cable. Then loosen the cores from
the terminal strip.
•
Loosen the protective earth conductor from the internal earth
terminal.
•
Loosen the union nuts of the strain relief on the connecting cable.
Then pull the cable out of the strain relief.
•
Loosen the union nuts of the M23 socket.
•
Pull the socket away from the plug.
•
Loosen the union nuts of the sockets on all M12 individual connections.
•
Pull the sockets away from the individual connections.
Disconnecting the pneumatic connections
Disconnecting the pneumatic connections is described in
Chapter 3.

Dismantling the valve terminal

Dismantling the valve terminal is described in Chapter 2.
Festo P.BE-VTSA-44-EN en 1101f