Target Group; Service - Festo VTSA-44-MP Series Manual

Contents and general instructions

Target group

Service

VIII
Certain valves of the valve terminal have been certified by the
Underwriters Laboratories Inc. (UL) for the USA and Canada.
These valves are marked as follows:
Note
Observe the following if the UL requirements are to be
complied with in your application:
– Rules for observing the UL certification can be found in
the separate UL-specific documentation. The relevant
technical specifications listed there also apply here.
– The technical data in this documentation may show
values deviating from this.
This manual is directed exclusively toward technicians trained
in control and automation technology.
Please consult your local Festo repair service if you have any
technical problems.
Festo P.BE-VTSA-44-EN en 1101f