Fitting/Removing Optional Inscription Label Holders - Festo MPA-L Series Description

2. Mounting
1
Mounting,
Type VMPAL−BD
2
Slots in
connection and
supply plates
Fig. 2/4: Assembly of an additional mounting
2.4

Fitting/removing optional inscription label holders

Mounting
Festo P.BE−MPAL−EN en 1008NH
1
2
For identification of the valves or the working ports labels
can be attached to the sub−bases, if corresponding Inscrip
tion label holders type VMPAL−ST−AP−10, are fitted.
Information about accessories can be found in the Festo
Catalogue (see www.festo.com\catalogue).
Proceed as follows:
1.
2.
2−13